自動上料攪拌機過濾系統的好壞，是大家關注的問題。選擇一款好的濾芯對生產和有著無可替代的作用，對于它的濾芯我們怎么判斷它的好壞呢？接下來小編就來介紹一下。

The quality of the filter system of the automatic feeding mixer is a matter of concern. Selecting a good filter element plays an irreplaceable role in production and environmental protection. How can we judge its quality? Next, let's introduce it.

1、看材質，材質是覺得濾芯好壞的決定因素，好的材質具有耐腐蝕，耐壓，阻力小等特點。如高分子纖維的意大利產質量非?？煽?。

1. According to the material, the material is the decisive factor for the filter element. Good material has the characteristics of corrosion resistance, pressure resistance and small resistance. For example, the quality of polymer fiber produced in Italy is very reliable.

2、觀察濾筒的端蓋和金屬的接觸是不是嚴絲合縫。

2. Observe whether the end cover of the filter cartridge is in perfect contact with the metal.

3、看自動上料攪拌機濾芯是否可以循環使用，能不能用水清洗，使用壽命大概多久。

3. Check whether the filter element of the automatic feeding mixer can be recycled, whether it can be cleaned with water, and how long the service life is.

4、考慮自動上料攪拌機的濾芯精度和透氣性如何。

4. Consider the filter element accuracy and permeability of the automatic feeding mixer.

我們通常根據物料的顆粒大小進行選擇，對于顆粒較大的物料，可選擇過濾精度較大的過濾器，反之對于顆粒較小的粉末或者納米級物料的話，則須選擇高精度的過濾器了。這樣才能實現自動上料攪拌機無塵化操作，達到提高產品質量的目的。

We usually choose according to the particle size of materials. For materials with large particles, we can choose a filter with higher filtering accuracy. On the contrary, for powder or nano materials with small particles, we must choose a filter with high accuracy. In this way, the dust-free operation of the automatic feeding mixer can be realized and the product quality can be improved.

此外每天工作結束后，司機應負責向攪拌筒內注入清水并高速(14—18轉/分)旋轉5—10分鐘，然后將水排去，以保證筒內清潔。用高壓水清洗攪拌筒各個部分時，應注意避開儀表及操縱桿等部位。壓力水噴嘴與車身油漆表面間的距離不得小于40厘米。

In addition, at the end of each day's work, the driver shall be responsible for injecting clean water into the mixing drum and rotating it for 5-10 minutes at a high speed (14-18 rpm), and then draining the water to ensure that the drum is clean. When cleaning each part of the mixing drum with high-pressure water, attention should be paid to avoiding instruments, control rods and other parts. The distance between the pressure water nozzle and the body paint surface shall not be less than 40 cm.

攪拌筒內外積污及殘存的混凝土渣塊時，以及在機修人員進入筒內進攪拌行自動上料攪拌車在工作時應注意什么檢修和焊補作業時，需先關閉汽車發動機，使攪拌筒完全停止轉動。

When removing the dirt and residual concrete slag inside and outside the mixing drum, and when the machine maintenance personnel enter the drum to mix, what should be paid attention to when the automatic feeding mixer is working, the car engine should be shut down first to make the mixing drum stop completely.

在機修人員進入筒內工作期間，要保證拌筒內通風良好，空氣新鮮，無可然氣體及有害灰塵，氧氣供應充足。在筒內使用電動工具操作時，操作人員要有良好的絕緣保護。

During the period when the machine maintenance personnel enter the mixing drum to work, ensure that the mixing drum is well ventilated, the air is fresh, there is no natural gas and harmful dust, and the oxygen supply is sufficient. When using electric tools in the cylinder, operators shall have good insulation protection.

以上就是辨別自動上料攪拌機濾芯好壞的技巧的問題講解了，相信大家都已經有一定的學習了，希望大家在工作時一定要注意。更多相關事項就來我們網站http://m.cqsgy.com咨詢吧！

The above is the explanation of the skills to distinguish the filter element of the automatic feeding mixer. I believe that everyone has learned to some extent, and I hope you must pay attention to it when working. Come to our website for more information http://m.cqsgy.com Consult!