由于長時間連續運行，混凝土攪拌機的溫度會升高，但如果溫度超過了混凝土攪拌機本身的能力，設備就會受到一定程度的損壞。因此，當設備溫度過高時，我們需要做好相應的維護工作，下面就來了解一下吧。

The temperature of the concrete mixer will rise due to continuous operation for a long time, but if the temperature exceeds the capacity of the concrete mixer, the equipment will be damaged to some extent. Therefore, when the temperature of the equipment is too high, we need to do a good job in the corresponding maintenance. Let's take a look.

1,身體為了防止發動機過熱:

1. To prevent the engine from overheating:

由于環境溫度高,發動機容易過熱,加強發動機冷卻系統的檢查和維護,包括水箱、恒溫器、水泵、風扇和其他部分的檢查,注意及時注入冷卻水。當水溫超過100℃時，在陰涼處停車降溫，讓發動機空轉，打開引擎蓋幫助加熱。

Due to the high ambient temperature, the engine is easy to overheat. Strengthen the inspection and maintenance of the engine cooling system, including the inspection of water tank, thermostat, water pump, fan and other parts, and pay attention to the timely injection of cooling water. When the water temperature exceeds 100 ℃, stop in the shade to cool down, let the engine idle, and open the engine hood to help heating.

2、防止發動機爆燃:

2. To prevent engine detonation:

夏季溫度較高，有時超過35℃，而這個季節，對于一些部分老化的汽車，自然爆燃的概率也要高得多。所以做好準備。

The temperature is higher in summer, sometimes exceeding 35 ℃. In this season, the probability of natural deflagration is much higher for some partially aged cars. So get ready.

3、防止對車漆的損傷:

3. To prevent damage to the paint:

車漆經過強烈的日曬，老化、起皺，而普通的美容打蠟雖然能起到一定的防曬作用，但因為任何車蠟都含有硅成分，經過紫外線照射會使車漆生銹，留下小黑點。車蠟本身并沒有起到增強硬度、抗紫外線的作用，但會因溫度過高而迅速丟失，停車時要注意將車停放在陰涼處。

The car paint is subject to strong sunlight, aging and wrinkling. Although ordinary cosmetic waxing can play a certain role in sun protection, it will rust and leave small black spots after ultraviolet radiation because any car wax contains silicon. The car wax itself does not play a role in enhancing the hardness and anti UV, but it will be quickly lost due to high temperature. When parking, pay attention to parking the car in a cool place.

4、防止爆胎:

4. Prevention of tire blowout:

高溫易爆胎，高溫易使輪胎變形，耐跌落。但是由于輪胎本身，氣壓不達標，輪胎老化，性能變?nèi)?，或者在行駛過程中輪胎碰到堅硬的金屬或其他堅硬的東西，都會導致汽車的輪胎突然癟掉。

High temperature is easy to burst, high temperature is easy to deform the tire, and it is resistant to falling. However, due to the tire itself, the air pressure is not up to standard, the tire is aging, its performance becomes weak, or the tire encounters hard metal or other hard things during driving, it will cause the tire of the car to suddenly deflate.

有關混凝土攪拌機運行時間過長出現高溫的解決問題，我們從四個方面為您講解完畢了，您再使用前后要注意預防以及檢查，問題的出現往往就在粗心大意和僥幸中發生。更多相關事項就來我們網站http://m.cqsgy.com咨詢了解吧！

We have explained the solution to the problem of high temperature caused by the long operation of the concrete mixer from four aspects. You should pay attention to prevention and inspection before and after reuse. Problems often occur in carelessness and fluke. Come to our website for more information http://m.cqsgy.com Ask and understand!