攪拌一體機的4個檢查規定
來源：http://m.cqsgy.com/日期：2022-09-30
概述：攪拌一體機屬于工業車輛，做好檢查規定是非常要重要的，接下來，我們看看攪拌一體機需要遵守哪些檢查規定。攪拌一體機的4個檢查規定如下：
攪拌一體機屬于工業車輛，做好檢查規定是非常要重要的，接下來，我們看看攪拌一體機需要遵守哪些檢查規定。攪拌一體機的4個檢查規定如下：
The mixing machine is an industrial vehicle, so it is very important to make inspection regulations. Next, let's see what inspection regulations the mixing machine needs to comply with. The four inspection regulations of the mixer are as follows:
一、攪拌系統檢查規定：
1、 Inspection regulations for mixing system:
1.筒體與托輪接觸應良好，不應跑偏、竄動和嚴重變形。
1. The cylinder shall be in good contact with the supporting wheel, and shall not deflect, move or deform seriously.
2.攪拌筒機架緩沖件不應有裂紋或損傷；攪拌筒內葉片、進料斗、主輔卸料槽不應嚴重磨損和變形。
2. The buffer parts of the mixing drum frame shall be free from cracks or damage; The blades, feed hopper and main and auxiliary discharge chute in the mixing drum shall be free from serious wear and deformation.
3.攪拌筒、進料斗和主輔卸料槽不應有明顯的混凝土積塊。
3. The mixing drum, feed hopper and main and auxiliary discharge chute shall be free of obvious concrete blocks.
二、 液壓系統檢查規定：
2、 Inspection regulations for hydraulic system:
1.取力器工作時，應結合平穩，壓力應達到設計的額定要求，不應滲漏。
1. When the power take-off works, it shall be combined stably, and the pressure shall meet the rated requirements of the design without leakage.
2.液壓系統零部件應齊全完好，系統工作壓力應符合說明書要求。
2. The components of the hydraulic system shall be complete and intact, and the working pressure of the system shall meet the requirements of the manual.
3.液壓油型號、油質、油量及使用應符合有關規定；散熱泵工作時油溫不應超過80℃；管路連接應可靠；不應銹蝕、變形、老化、破損、滲油。
3. The model, quality, quantity and use of hydraulic oil shall comply with relevant regulations; The oil temperature of the radiator pump shall not exceed 80 ℃ during operation; The pipeline connection shall be reliable; It shall be free from rust, deformation, aging, damage and oil leakage.
4.各液壓操縱部分運動應靈活、連接可靠。
4. Each hydraulic control part shall be flexible in movement and reliable in connection.
三、供水系統水泵及部件應齊全完整，不應泄漏。
3、 The water pump and components of the water supply system shall be complete without leakage.
四、裝置檢查規定：
4、 Inspection regulations for safety devices:
1.液壓系統中應設有防止過載和液壓沖擊的裝置；溢流閥的調整壓力不得大于液壓泵的額定壓力。
1. The hydraulic system shall be equipped with safety devices to prevent overload and hydraulic impact; The adjustment pressure of the safety relief valve shall not be greater than the rated pressure of the hydraulic pump.
2.攪拌一體機側面、后部的防護裝置應齊全、完好。
2. The side and rear protective devices of the mixer shall be complete and intact.
3.攪拌一體機應配備滅火器材。
3. The mixing machine shall be equipped with fire extinguishers.
嚴格的規范是使用攪拌一體機的重要工作，希望大家能夠按照上面的檢查規定對車輛進行檢查。關注我們
http://m.cqsgy.com，了解更多事項！
Strict specifications are important for the safe use of the mixer. I hope you can inspect the vehicle according to the above inspection regulations. Follow us http://m.cqsgy.com , learn more!
全國服務熱線
點擊撥打服務熱線：400-879-1999
